Small and Medium-Sized Lifting Equipment Bz Model Pillar Jib Crane
The most common applications for jibs are individual work stations; machine tools, welding / fabrication stations, and some small assembly stations.
- They are also often used in simple loading / unloading operations where it is not necessary to spot a load precisely.
- Jib cranes most often handle lighter loads at lower duty cycles than their bridge and gantry crane counterparts.
If there is a need for precise locating of heavy loads, a large area of hook coverage, or frequent use for heavy loads, the jib crane may not be the best solution.
| Model | BZD1 | BZD2 | BZD3 | BZD5 |
| Lift capacity(t) | 1 | 2 | 3 | 5 |
| horizontal throw(m) | 5.5-10.5 | 5.5-10.5 | 5.5-10.5 | 5.3-10.3 |
| Radius of gyration(m) | 7-12 | 7-12 | 7-12 | 7-12 |
| angle of revolution | 180°/270/°360° | |||
| Lift height(m) | 3-5 | |||
| Lift speed (m/min) | 8/2,4/1 | |||
| Travel speed (m/min) | 20 | |||
| Power Supply | Three-phase A.C. 380V, 50HZ (As your demand) | |||
pillar jib crane Mechanism :
1. box-type shaped by wielding;
2. High quality carbon steel Q235B and Q345B;
3. the girder connected by high strength screws;
4. Welding seams are tested by X-ray and ultrasound;
5. Forged wheels;
6. Compact structure, small volume and light weight trolley;
7. Lifting mechanism is open type winch trolley;
8. Compact reducer motor drive, step less control, hardened gears and safety disc brake;
9. Good operation performance, step less speed regulating and running smoothly;
10. Main girders Shot blasting sa2.5 after welding to release internal stresses;
11. Painting high quality epoxy zinc-rich primer, and the thickness of oil film is 140μm;
Pls tell me the following information and i will send you drawing and detail quotation.
1.Lifting Capacity(T): __ ?( The rated capacity)
2. Lifting Height(m):__ ? (Height from hook center to the floor)
3. Arm length(m): __ ? (Useful hook arm length)
4. Lifting Speed(m/min): __ ? ( Single, Dual)
5. Slewing speed(m/min):__ ?( Standard or as your demand)
6 .Industrial Voltage: __ ? ( like :380V, 50Hz, 3ph )
Pillar jib crane main parts
Jib crane classification
