Material: Polyurethane
Hardness:95A-98A
Temperature:-20 °C ~+80 °C
Min Burst Pressure:30bar(20°C )
Colors are opitional
Features:
Composed by two or multiple row of PU or PVC tubes, with variety of colorsfor better distinction
Included with several PA PU PE tubes inside ,and covered with PVC or TPU , anti-wear . space savingMultiple row hose composed by multiple row of PU or PVC tubes , with variety of colors for better distinction
Application : Can be used for robot , industrial robots and miniing etc .
Standard Size:
|
|
| Meter/roll | Burst pressure | Burst pressure | Burst PSI | Burst PSI | |
PU0320-200M | 3 | 2 | 200 | 34 | 19 | 435 | 270 | |
PU0425-200M | 4 | 2.5 | 200 | 38 | 21 | 492 | 305 | |
PU0530-200M | 5 | 3 | 200 | 37 | 21 | 480 | 297 | |
PU0640-200M | 6 | 4 | 200 | 31 | 17 | 401 | 251 | |
PU0840-100M | 8 | 4 | 100 | 48 | 25 | 633 | 363 | |
PU0850-100M | 8 | 5 | 100 | 32 | 19 | 414 | 268 | |
PU0855-100M | 8 | 5.5 | 100 | 28 | 16 | 365 | 219 | |
PU0860-100M | 8 | 6 | 100 | 21 | 11 | 295 | 162 | |
PU1065-100M | 10 | 6.5 | 100 | 31 | 18 | 392 | 286 | |
PI1075-100M | 10 | 7.5 | 100 | 26 | 15 | 335 | 216 | |
PU1280-100M | 12 | 8 | 100 | 31 | 17 | 405 | 248 | |
PU1295-100M | 12 | 9.5 | 100 | 24 | 14 | 313 | 203 | |
PU1410-100M | 14 | 10 | 100 | 20 | 11 | 255 | 159 | |
PU1612-100M | 16 | 12 | 100 | 17 | 10 | 216 | 135 | |
PU1611-100M | 16 | 11 | 100 | 24 | 14 | 315 | 205 | |
PU1/8"-200M | 1/8" | 0.066" | 200 | 43 | 24 | 585 | 355 | |
PU3/16"-200M | 3/16" | 0.188" | 200 | 35 | 19 | 455 | 275 | |
PU1/4"-200M | 1/4" | 0.17" | 200 | 34 | 15 | 435 | 210 | |
PU3/8"-100M | 3/8" | 1/4" | 100 | 31 | 17 | 408 | 252 | |
PU1/2"-100M | 1/2" | 0.32" | 100 | 34 | 17 | 438 | 242 | |
PERFORMANCE DATA:
1) Temperature and the working environment (temperature): -40 ºC ~ +80 ºC (non-chemical gas space)
Fluid temperature range: -15 ºC ~ +60 ºC (not ice over)
2) Diameter tolerance: ± 0.1mm ~ ± 0.15mm
3) Hardness: Shores 95A / 98A (according to season and region)
4) Tensile strength: 400kgf/cm2 (5690 P
5)Elongation limit: 490-590%
6)Resistant to wear and tear of: 35mg
7)Tear strength: 110kg/cm2 (1565 PSI)
8) Blasting pressure and the pressure to work long hours for the safety factor ratio: 3:1
9)Minimum bending angle:
3 * 2-12 ºC ;4 * 2.5-12 ºC ;5 * 3-33 ºC ;6 * 4-35 ºC ;8 * 5-39 ºC ;8 * 5.5-46 ºC ;10 * 6.5-43.5 ºC ;10 * 7.5-42 ºC ;12 * 8-37 ºC; 12 * 9.5-54 ºC ;14 * 10-70 ºC ;16 * 12-70 ºC.
SUPERIOR FEATURES:
• excellent flexibility.
• bend radius less resistance around the song.
• high elastic recovery memory effect.
• resistant to wear and tear, impact.
• part of the resistance can not corrosive chemicals and oils.
• Resits fuels and can be spliced.
• 100% incineration. approved by scientific Eoology Group.
MATERIAL DESCRIPTION:
Thermoplastic resin-amino acid (commonly known as TPU) is contained by the NCO functional groups of MDI and contain OH functional groups of polyol, extending from the mixing of extrusion, with amino acid lipid gene polymers.
APPLICATION:
Pneumatic tools
Pneumatic Piping
Instrumentation
Lube Lines
Transfer Chemicals With No Erosive Nature
Process Control
Automated Assemblage Lines
Laboratory
Robotics
General Industry Water And Garden
